Our industrial autoclaves are used for the more extensive processing, including sterilization, vulcanization, ebonite coatings, composite materials, textile finishes and so on.
They are produced with the most advanced manufacturing technologies and are designed to ensure ease to use, maximum safety in operation and durability.
They can be manufactured in horizontal or vertical version, with quality carbon steel or stainless steel.
The locking system of the door is fast and with single maneuver, with interlocking rings peripheral teeth and possibility to assemble cylinders with hydraulic unit for automatic handling.
The teeth of the locking rings are provided with removable bronze plates to avoid problems of friction between the materials during the closing and opening operations.
The heating of the hot air autoclaves can be obtained by means of oil serpentine or electric battery.
All autoclaves are equipped with safety systems against accidental opening of the door and any mistake of operator action.
The standard equipment includes the electric control panel in accordance with IEC standards with indication of the operation steps, process valves and regulation, control and safety accessories.
Additional accessories are chosen according to the working process required.
On request the management system may also provide the PLC with color touch screen, automatic and modulating valves, external trolleys and internal loaders.
All the pressure parts are assembled and welded by personnel qualified ISO 9606-1 or ASME, and designed using the most common and recognized calculation codes (EN 13445, ASME VIII Div. 1 and so on).
The external insulation of the vessel is made by thick and high density mineral wool contained in a galvanized metal sheet or stainless steel, and painted steel bottoms on the door and in the rear (to give resistance to the parts most subject to possible shock).
In the case of hot air autoclaves it is also provided an internal thermal insulation with mineral wool and polished stainless steel sheet.
During the production all the autoclaves are subjected to non-destructive controls required by the current regulations (such as radiographs and penetrating test), to the hydraulic pressure tests with the presence of a Notified Body and operation check.
The technical specifications (project data, size and type of operation) are defined in the offer phase and according to customer requirement.
It is also possible to manufacture autoclave vessels according to customer design, with or without accessories (for example furnace vessels for metals heat treatment), or special executions to satisfy the most different needs.
Construction in accordance with the European Directive 2014/68/EU (PED) and protection IP 54 or IP 55.
On request are also evaluated other construction standards and certifications of the autoclaves.
Design pressure : on request.
Design temperature : on request.
Internal diameter : 500 ÷ 3.500 mm.
Useful lenght : on request.
Fluid inside : air, steam, air/steam, gas.